Cameo H1 FC Bedienungsanleitung Seite 20

STATIC STANDALONE MODE
The Static standalone mode allows the Dimmer, Dimmer Fine, Strobe and RGBAL values to be set
directly on the device with values between 000 and 255, in a similar way to with a DMX controller.
In this way, an individual scene can be created without an additional DMX controller.
Select Stand Alone, confirm the selection, then select Static and confirm again. Now select the
menu item you wish to edit and confirm the selection. In the selected menu item, set the desired
value from 000 to 255 and confirm the entry. The strobe effect values correspond to those in
channel 2 of the DMX table 3 CH CP.
STANDALONE MODE COLOR MACRO
15 different colour macros and 4 individual colours (User Color 1-4) are available as presets. The
brightness can be adjusted for each preset.
Select Stand Alone, confirm the selection, then select Macro and confirm again. Select the de-
sired colour preset and confirm (Color Off = blackout). The brightness of the selected preset can
now be adjusted from 000 to 100. Confirm all entries.
The individual colours User Color 1-4 are created in menu item Edit User Color in the Stand
Alone menu.
STANDALONE MODE TUNEABLE WHITE
In the standalone mode Tuneable White, the colour temperature (CCT) can be adjusted from 1800
K to 6500 K in 100 K increments, in addition to the brightness (Dimmer) and colour (Tint).
Select Stand Alone, confirm the selection, then select Tunable White and confirm again. Now
select the menu item you wish to edit and confirm the selection. Set the desired value and con-
firm the entry.
20