Diffusers; Installation - Cameo CLZB60BLSD Bedienungsanleitung

DIFFUSERS

Two diffusers are supplied with the lamp, each with a different beam angle (1 x 25° with notched edge for identification, and 1 x 40°). The beam
angle of the lamp can be adjusted to 11° (without diffuser), 25°, or 40°. Place the desired diffuser (rough side facing front glass) in the provided
rubber frame, release the spring-loaded retaining pin (pull handle outwards approx. 1 cm), position the diffuser as shown in front of the front
glass of the lamp and release the retaining pin in order to insert it into the slot in the rubber frame.
1 2 3
INSTALLATION AND ASSEMBLY
Thanks to its integrated double bracket, the lamp can be positioned in a suitable location on a level surface. Installation on a traverse is
possible with a suitable traverse clamp (not supplied). Ensure firm connection to the mounting bracket and secure the lamp at the specified
position (A) with a suitable safety cable. Important: Overhead installation must only be carried out by qualified personnel.
A
13