Cameo H1 FC Bedienungsanleitung Seite 17

After you have switched on the UNICON remote unit (press BACK briefly to switch it on), the dis-
play will show "Update, Please Wait" (for service purposes only) for a short time then switch to the
main menu. Connect the remote unit to one or more RDM devices using DMX or network cables.
Select the menu item RDM/Fixture using the rotary-push encoder or by pressing the arrow
symbols  or  in the display and confirm the selection by pressing the encoder or the check
symbol  in the display. A list of all connected RDM devices is then displayed (in the example
H1 FC/H1 FC and H1 D/H1 D; the first part of the displayed RDM device shows the device model,
the second part after "/" is the designation that can be adapted in the Label menu item for easier
identification). Select H1 FC/H1 FC and confirm.
All information and configuration options for the spotlight that can be called up and edited via
RDM are now displayed.
17