Timer Function - Cameo H1 FC Bedienungsanleitung

STANDALONE MODE EDIT USER COLOR
The standalone mode Edit User Color allows you to store four individual colour presets for bright-
ness, stroboscope (strobe) and a colour mix of R, G, B, A and L directly in the device.
Select Stand Alone, confirm the selection, then select Edit User Color and confirm again. Select
the desired preset (Color 1 - Color 4) and confirm the selection. Now select the menu item you
wish to edit and confirm. Set the desired value from 000 to 255 and confirm again. The strobe
effect values correspond to those in channel 2 of the DMX table 3CH CP.

TIMER FUNCTION

The timer function allows the standalone modes Static, Color Macro and Tuneable White to be tim-
er controlled in such a way that the Fade In time can be configured from 0.5 seconds to 24 hours,
the Dwell Time from 0.5 seconds to 24 hours and infinite (Limitless) and the Fade Out time from
0.5 seconds to 24 hours. After activation of the timer function, the timer control will be imple-
mented upon the next system start.
Select Stand Alone, confirm the selection, then select Timer and confirm again. Under Switch,
select the setting On and confirm. For the individual timer control settings, select Fade In, Dwell
Time or Fade Out and confirm. You can now set the respective value as desired. Confirm all
entries. To deactivate the timer function, under point Switch, select the setting Off and confirm.
Please note: The timer function is suitable for use in master/slave mode via cable.
21