Target Laser; Commissioning; Inserting/Replacing The Rechargeable Battery - VOLTCRAFT IR-1600 CAM Bedienungsanleitung

c) Target laser
The target laser is active during measurement depending on the pre-setting. A warning icon appears in the display
with the laser active. Never look into the laser aperture (12) during measurement.
Laser point
IR measuring area

8. Commissioning

• Before working with the meter, you have to insert the enclosed Li-ion rechargeable battery.
• Insert the rechargeable battery as described in this chapter and charge it.
• The IR-thermometer permits individual system settings for measuring that you should perform after initial com-
missioning.
a) Inserting/replacing the rechargeable battery
• The enclosed Li-ion battery must be inserted first at initial commissioning. To open the battery compartment, pull
the battery compartment lid (10) away forwards. The battery compartment lid is unlocked. Fold open the battery
compartment lid (10) forwards. Connect the plug of the rechargeable battery to the pug-in socket in the battery
compartment in the correct polarity. The pug is designed so that the rechargeable battery can only be connected
in the proper polarity. Do not apply any force when plugging in the rechargeable battery.
• Close the battery compartment again by folding shut the battery compartment lid (10). Observe that the cables are
not caught and the lock latches.
• Do not leave the rechargeable battery in the meter during longer measuring breaks (approx. >2 weeks), since
even leak-protected rechargeable batteries may corrode and release chemicals that may harm your health or
destroy the device.
A matching Li-ion spare battery of type 18500 is available under the order number: Item no. 1233684
(please order 1x).
Other rechargeable battery types or non-rechargeable batteries must NOT be used.
36
The target laser is designed as a twin device and marks
the inner, approximate edge area of the measured area
(approx. 90%).
When both laser points meet, the smallest measuring area
has been reached. It is 18 mm in diameter.
For large distances, the two laser points move apart ac-
cording to the measuring area.
Midpoint
Object area