Troubleshooting; Disposal; Product; Rechargeable) Batteries - VOLTCRAFT IR-1600 CAM Bedienungsanleitung

11. Troubleshooting

With this IR thermometer, you have purchased a product built to the latest state of the art and operationally safe.
Nevertheless, problems or errors may occur.
For this reason, the following is a description of how you can easily remove possible malfunctions yourself:
Always observe the safety notes!
Problem
The measuring device does not work.
Wrong measured value indication.
The meter no longer reacts.
Other repairs than described above must only be performed by an authorised specialist.
If you have any questions about handling of the device, contact our technical support.

12. Disposal

a) Product
Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of
its service life, dispose of the product in accordance with applicable regulatory guidelines.
Remove any inserted (rechargeable) batteries and dispose of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used (rechargeable) batteries.
Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate that disposal in the domestic
waste is forbidden. The designations for the heavy metals involved are: Cd = Cadmium, Hg = Mercury,
Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or wherever (re-
chargeable) batteries are sold.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
48
Possible cause
Is the rechargeable battery flat?
Check the status.
Is the wrong emission degree set?
Is the lens contaminated?
Is the measuring surface covered by a glass pane?
Is the operating temperature of the environment exceeded or undercut?
The system software has a fault. Push the button "RESET" (16) with a
pointy object (e.g. a paper clip) and switch on the device again.