Operation; Attaching The Accessories; Filling The Water Reservoir; Fill The Water Reservoir Up To The "Max" Marking - Kärcher sc 1402 Kurzanleitung

Operation

Attaching the Accessories

Tightly insert the steam plug (C7) into
the appliance connector (A1). The locks
of the steam plug must lock into the co-
ver of the appliance connector (see
Figure 5).
Connect the required accessories (D1,
E1, F1) with the steam gun (C1). Insert
the open end of the accessory on the
steam gun (C1) and push onto the
steam gun until the unlocking button
(C2) of the steam gun locks into place
(see Fig. 6).
Use the extension pieces (G1) if neces-
sary. To do so, connect one or both ex-
tension pieces to the steam gun (C1)
(see Fig. 7). Insert the required acces-
sories (D1, E1, F1, H1) on the free end
of the extension piece.
The detail nozzle (D1) may also be
used with the extension piece (D2), the
round brush (D3), or the power nozzle
(D4) (see Fig. 8). To do so, put the two
grooves of the attachments on the locks
of the detail nozzle and turn clockwise
until the stop.
Removing the Accessories
DANGER
Hot water may drip out of the accessory
parts while you are detaching them! Never
detach accessory parts while steam stre-
Figure 5
ams out - risk of scalds!
To detach the accessory parts, press
the unlocking button (C2 or G2), and
pull the items apart (see Figure 9).
To detach an attachment from the detail
nozzle, turn the attachment counter-
clockwise and pull the parts apart.
Figure 6

Filling the Water Reservoir

You can remove the water reservoir to fill it
or you can fill it directly on the appliance.
Note: If you always use usual commercial
distilled water it is not necessary to descale
the boiler.
CAUTION
Do not use condensation water from the
drier! Do not fill in detergents or other addi-
tions!
A) Remove the water reservoir
Pull out the water reservoir using the
Figure 7
handle (A8).
Fill the water reservoir up to the "MAX"
marking.
Insert the water reservoir and press
downwards.
Figure 8
Figure 9
English 21