Boss GS-10 Bedienungsanleitung Seite 90

Anhang
MIDI Machine Control (MMC)
F0H 7FH 7FH 06H com F7H
F0H = System Exclusive
7FH = ID Number (Universal Realtime Message)
7FH = Device ID (Broadcast)
06H = Sub ID#1(Machine Control Command)
com = Sub ID#2(MMC Command)
F7H = EOX (End of Exclusive/System common)
* "com" (MMC Command) that I transmit with GS-10 is following.
01H
02H
44H 06H 01H 00H 00H 00H 00H 00H
06H
3. EXCLUSICE COMMUNICATION
On the GS-10, exclusive messages can be used as follows. - Transmit/receive GS-10 system/
patch data.
The model ID for GS-10 exclusive messages is 00H 63H, and you can set up the device ID at
00H–1FH.
ONE WAY COMMUNICATION
Request Data 1
F0H 41H dev 00H 63H 11H aaH bbH ccH ddH ssH ttH uuH vvH sum F7H
F0H = Exclusive Status
41H = Manufacturer ID
dev = Device ID
00H = Model ID
63H = Model ID
11H = Command ID
aaH = Address
bbH = Address
ccH = Address
ddH = Address
ssH = Size
ttH = Size
uuH = Size
vvH = Size
sum = Checksum
F7H = EOX
* This message can only be received, and is not transmitted from the GS-10.
* When transmitting large Size values spanning fragmented addresses, the data can be
transmitted only to those addresses that are contiguous.
Data Set 1
F0H 41H dev 00H 63H 12H aaH bbH ccH ddH eeH ... ffH sum F7H
F0H = Exclusive Status
41H = Manufacturer ID
dev = Device ID
00H = Model ID
63H = Model ID
12H = Command ID
aaH = Address
bbH = Address
ccH = Address
ddH = Address
eeH = Data
: = :
ffH = Data
sum = Checksum
F7H = EOX
* When transmitting large amounts of data spanning fragmented addresses, the data can
be transmitted only to those addresses that are contiguous.
90
Stop
Play
RESET
REC
RQ1(11H)
(Roland)
(Dev=00H-1FH)
MSB (GS-10)
LSB (GS-10)
(RQ1)
MSB
:
:
LSB
MSB
:
:
LSB
(End of System Exclusive)
DT1(12H)
(Roland)
(dev = 00H-1FH)
MSB (GS-10)
LSB (GS-10)
(DT1)
MSB
:
:
LSB
(End of System Exclusive)
Inquiry Message
Identity Request
F0H 7EH 10H 06H 01H F7H
F0H = Exclusive Status
7EH = ID Number
10H = Device ID
06H = Sub ID#1
01H = Sub ID#2
F7H = EOX (End of System Exclusive)
* The 7FH (Broadcast) device ID is also supported.
* When an Identity Request is received, the GS-10 will transmitted the following Identity
Reply.
Identity Reply
F0H 7EH 10H 06H 02H 41H 63H 01H 00H 00H 00H 00H 00H 00H F7H
F0H= Exclusive Status
7EH= ID Number (Universal Non-realtime Message)
10H= Device ID
06H= Sub ID#1
02H= Sub ID#2
41H= ID Number
63H 01H= Device Family Code
00H 00H= Device Family Number Code
00H 00H 00H 00H= Software Revision Level
F7H= EOX (End of System Exclusive)
* When an Identity Request is received, the GS-10 will transmitted the following Identity
Reply.
4. PARAMETER ADDRESS MAP
The address and size are displayed under 7-bit hexadecimal notation.
Address MSB
Binary 0aaa aaaa 0bbb bbbb
7-bit Hexadecimal AA BB
Size MSB
Binary 0sss ssss 0ttt tttt
7-bit Hexadecimal SS TT
(Roland)
LSB
0ccc cccc 0ddd dddd
CC DD
LSB
0uuu uuuu 0vvv vvvv
UU VV