Squeegee Blades Disassembly / Assembly - Comet CPS 55 ADVANCE BYT Bedienungsanleitung

6.7. SQUEEGEE BLADES DISASSEMBLY /
ASSEMBLY
A
Photo 18 -
A) Fixing knobs of the plastic support of the squeegee
blades
B) Fixing bolt of the squeegee
Remove the squeegee from its support (see 7.6).
Completely unscrew the fixing knobs of the plastic
support of the squeegee blades (Photo 18 - A); press
on the bolts of the plastic support of the rubber
blades (Picture 19 - A) on both sides until the plastic
support comes out from the body of the squeegee
(Picture 20 - A).
Remove the rubber blades from the plastic support
by pulling the blade at its end (Photo 21 - A).
Assemble the new rubber blade on the plastic sup-
port, inserting the plastic pins of the support into the
corresponding holes on the blade.
Re-insert the plastic support inside the body of the
squeegee and fix it firmly by tightening the fixing
knobs (Photo 19-A) (Photo 18-A).
Assemble the squeegee on its support (see 7.5).
Photo 19
A) Bolts of the plastic support of the rubber blades
B B
A
A
A
Photo 20
A) Plastic support of the rubber blades
Photo 21
A) Rubber blade of the squeegee
36