Changing Measurement Mode; Continuous Measurement Mode; Single Measurement Mode; Error, Faults & Troubleshooting - Parkside PLEM 20 A4 Bedienungs- Und Sicherheitshinweise

Changing measurement mode

Continuous measurement mode

Under single measurement mode, press and hold
the MEAS button
tinuous measurement mode.
Laser icon flashes in continuous measurement
mode

Single measurement mode

Under continuous measurement mode, press and
hold the MEAS button
single measurement mode.
Laser icon stays on in single measurement mode.
Error, faults & troubleshooting
Faults Cause
----- Calculation error
36 GB/IE
for 3 seconds to enter con-
4
for 3 seconds to enter
4
Solution
Pay attention to
the correct oper-
ating measuring
range.