Dell EMC PowerEdge XR11 Installations- Und Servicehandbuch Seite 38

Figure 24. Removing the processor air shroud
Next steps
Replace the air shroud.
Installing the air shrouds
The system supports PCI air shroud and processor air shroud.
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Vor der Arbeit an Komponenten im Inneren Ihres Systems.
NOTE: The procedure to install the air shrouds is the same for Rear Accessed and Front Accessed configurations.
Steps
1. Align the guide pins on the system with guides on the air shroud.
2. Lower the air shroud into the system until it is firmly seated.
38 Installieren und Entfernen von Systemkomponenten