Figure 18. Installing the front bezel filter for Rear Accessed configuration
Next steps
Install the front
bezel.
Systemabdeckung
Removing the system cover
Prerequisites
1. Follow the safety guidelines listed in the
Safety
instructions.
2. Follow the procedure listed in the
Before working inside your
system.
Steps
1. Using a 1/4-inch flat head or Phillips 2 screwdriver, rotate the lock counterclockwise to the unlock position.
2. Lift the release latch until the system cover slides back.
3. Lift the cover from the system.
Installieren und Entfernen von Systemkomponenten
33