Dell EMC PowerEdge XR11 Installations- Und Servicehandbuch Seite 10

Table 2. Features available on the front view of Front Accessed configuration (continued)
Item
6
7
8
9
10
11
12
NOTE: For more information, see the Dell EMC PowerEdge XR11 Technical Specifications on the product documentation
page.
10 PowerEdge XR11 System overview
Ports, panels, or slots
Power supply unit (PSU1)
USB 2.0 port
USB 3.0 port
VGA port
4 x 25 GbE LOM ports
System identification button
Power button control panel
Icon
N/A
Description
Indicates the PSU1 or primary
PSU.
This port is USB 2.0-
compliant.
This port is USB 3.0-
compliant.
Enables you to connect a
display device to the system.
Provides network connectivity
and can also be shared with
iDRAC when iDRAC network
settings is set to shared
mode.
Press the system ID button:
● To locate a particular
system within a rack.
● To turn the system ID on
or off.
To reset iDRAC, press and
hold the button for more than
16 seconds.
NOTE:
● To reset iDRAC using
system ID, ensure that
the system ID button is
enabled in the iDRAC
setup.
● If the system stops
responding during
POST, press and hold
the system ID button
(for more than 5
seconds) to enter the
BIOS progress mode.
Contains the power button,
iDRAC Direct micro port, and
the iDRAC Direct status LED.