Dell EMC PowerEdge XR11 Installations- Und Servicehandbuch Seite 35

Installing the system cover
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Vor der Arbeit an Komponenten im Inneren Ihres Systems.
3. Ensure that all internal cables are connected and routed properly, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the guide slots on the system.
2. Close the system cover release latch.
3. Using a 1/4-inch flat head or Phillips 2 screwdriver, rotate the lock clockwise to the lock position.
Figure 21. Installing the system cover for Rear Accessed configuration
Installieren und Entfernen von Systemkomponenten 35