Control Elements (Front Panel); Temperature Display And Led Behaviour - Silvercrest SEM 1050 A1 Bedienungsanleitung

6.

Control elements (front panel)

22
22
23
24
25
26
27
28
7. Temperature
display and LED
behaviour
The temperature display 24 shows the cur-
rent temperature of the espresso machine.
- After switching on, the device heats up
and the temperature rises. The espresso
LED 26 flashes.
- The correct temperature for preparing es-
pressois reached when the temperature
58 GB
23
On/off switch
Red LED / operating control light
Temperature display
Espresso button
Espresso LED
Steam LED
Steam button
24 25 26
is in the red range between 80 °C and
. The espresso LED 26 lights up con-
tinuously.
- If you press the steam button
the device continues to heat up and the
temperature continues to rise. The steam
LED 27 flashes.
- The correct temperature for steam pro-
duction is reached when the tempera-
ture is between
LED 27 is continuously lit.
- The temperature range between
and is too hot to make a delicious
espresso. The device must first cool
down until a temperature below
displayed again. This is indicated by all
three LEDs 23, 26, 27 flashing.
27 28
28,
and . The steam
is