PeakTech 3131eff Bedienungsanleitung Seite 21

* Opening the equipment and service – and repair work must only
be performed by qualified service personnel
* Measuring instruments don't belong to children hands.
1.1. Cleaning the cabinet
Clean only with a damp, soft cloth and a commercially available
mild household cleanser. Ensure, that no water gets inside the
equipment to prevent possible shorts and damage to the
equipment.
1.2. Meter Safety
Double insulation (Protection Class II)
DANGER! Risk of electric shock
ATTENTION! Refer to manual
Battery
AC
DC
CAUTION!
Note on using the supplied safety test leads according the IEC
/ EN 61010-031:2008:
Measurements in the field of overvoltage category CAT I or CAT II
can be performed with test leads without sleeves with a maximum
of up to 18mm long, touchable metallic probe, whereas for
measurements in the field of overvoltage category CAT III or CAT
IV test leads with put on sleeves, printed with CAT III and CAT IV
must be used, and therefore the touchable and conductive part of
the probes have only max. 4 mm of length.
-20-