Controlling The Vehicle - Reely GX3 Bedienungsanleitung

g) Controlling the vehicle
Place the vehicle on the ground. Do not reach into the motor or hold the vehicle by the wheels.
Operate the control lever for the drive function on the transmitter very carefully and do not drive too fast until
you get used to the responses of the vehicle. Do not move the transmitter controls quickly or jerkily.
If the vehicle shows a tendency to move to one side, adjust the steering trim on the transmitter accordingly.
The following images are for reference purposes only and do not necessarily correspond to the design of
the transmitter included with the product!
1. Release the throttle/brake lever (neutral position); the vehicle coasts to a stop or does not move.
2. Slowly pull the throttle/brake lever towards the handle to make the vehicle move forwards.
3. Move the throttle/brake lever away from the handle without a pause to make the vehicle move forwards and brake
(the vehicle decelerates quickly rather than coming slowly to a standstill).
4. Move forwards, brake and then drive in reverse: Push the throttle/brake lever away from the handle (braking)
without pausing; if the vehicle remains stationary, move the throttle/brake lever to the neutral position briefly (ap-
prox. 1 second), then push the throttle/brake lever away from the handle (vehicle will now reverse)
Move forwards
34
Brake If the vehicle is station-
ary, wait for a moment
(1 second)
Reverse