GF RSE Bedienungsanleitung Seite 38

Instruction manual
7 Changing the peeler blade
WARNING!
Sharp blade.
The blade is very sharp! Handling the spare blades involves a high risk of injury.
► Always wear cut-proof gloves as soon as you handle the peeling blades.
Step
1 Loosening the screw and taking off the peeler blade
Loosen and take out the screw that holds the blade in place, using a key, then turn the blade 180 degrees (reversible
blade).
2 Installing the peeler blade
Make sure that the peeler blade rests flat on the surface and that it touches the stop on the side of the peeler arm before
screwing it tight.
Note
Only genuine spare blades from Georg Fischer Piping Systems Ltd. are compatible with the tool.
38
Action
180°