Screwing On The Inserts And Insert Into Pipe End - GF RSE Bedienungsanleitung

Instruction manual
5.3

Screwing on the inserts and insert into pipe end

Step
1 Screwing on the inserts
Use the correct insert for the pipe size and screw it onto the spindle approximatively to the shown position.
2 Inserting the insert into the pipe end
Screw insert into pipe with minimum 3 threads.
Pos. 1)
Pos. 2)
Pos. 3)
Note
The peeling procedure begins at the pipe end and continues a clockwise direction away from the pipe end.
+ 3x 360°
Action
33