Transport And Storage; Service; Handling, Maintenance And Service; Disposal - GF RSE Bedienungsanleitung

Instruction manual
3.5

Transport and storage

► The product should be transported and/or stored in its original packaging.
► The product must be protected from harmful physical influences such as dust, heat (humidity).
3.6

Service

Have your tool repaired only by a qualified technician with identical replacement parts. This will ensure that the safety of the tool is
maintained.
3.7

Handling, maintenance and service

To achieve an optimum work results the tool has to be handled with care and maintained frequently. Pollution by sand and dirt has
to be avoided or, if necessary, removed with a soft cloth or a Q-tip.
Should the tool fail despite the great care taken in manufacturing and testing it, the necessary repairs should only be carried out
by an after-sales service centre authorised by the manufacturer.
Please note that the product is a technically demanding machine for field application. In accordance to the applicable standards the
tool is subject to periodical maintenance. The maintenance interval is 12 months, with heavy use shorter intervals are recommen-
ded.
During maintenance, the tool will be upgraded to the current technical standard of our devices and you get a 3-month guarantee on
function for the maintained tool.
The maintenance and the related checks are important for your safety and the continuous working reliability and safety of the tool.
Therefore, the maintenance and all necessary repairs, have to be carried out by the manufacturer or an authorised service point.
3.8

Disposal

► Before disposal, separate the individual materials into recyclable materials, normal waste and hazardous waste.
► When disposing of or recycling the product, individual components and packaging, comply with local laws and regulations.
► Observe country-specific regulations, standards and guidelines.
Before disposing of the product:
► Separate materials (plastics, metals, etc.) and dispose of them in accordance with local regulations.
A product marked with this symbol must be disposed of in the separate collection of electrical and electronic equipment. If you
have any questions regarding the disposal of the product, please contact your national GF Piping Systems representative.
3.9

Specific safety guidelines for the pipe end peeler

► The operator must have a safe foothold. Working overhead in areas not completely visible (e.g. under a pipe) is prohibited.
► Pipes and other workpieces must be firmly clamped or fixed. Poorly clamped or fixed workpieces may hurt you or affect your
safe foothold.
► The blade is very sharp. This poses a risk of injury. Do not touch the blade.
27