Changing The Headlight; M50 M125 M150 - APRILIA MOJITO 50 2004 Bedienungsanleitung

Mojito50_125_UK.book Page 73 Wednesday, June 9, 2004 9:23 AM

M50 M125 M150

CHANGING THE HEADLIGHT

BULBS
M50 M125 M150
Carefully read p. 72 (BULBS).
The headlight contains:
√ one parking light bulb (1);
√ one low / high beam bulb (2) (halogen).
All manuals and user guides at all-guides.com
M50 M125
M150
To reach the bulbs, proceed as follows:
◆
Remove the headlight metal ring, see p.
56 (REMOVING THE HEADLIGHT
METAL RING
M50
◆
Manually move the protection element
(3).
To change the bulbs, proceed as follows:
PARKING LIGHT BULB
!
CAUTION
Do not pull the electric cables to extract
the bulb socket.
◆
Grasp the parking light bulb socket (4),
pull it and remove it from its seat.
◆
Withdraw the parking light bulb (1) and re-
place it with a new one of the same type.
M50 M125 M150
LOW/HIGH BEAM BULB (HALOGEN)
To extract the bulb electric connector,
).
M125 M150
do not pull its electric wires.
◆
Grasp the bulb electric connector (5),
pull it and disconnect it from the bulb (6).
◆
Release the clip (7) that holds the bulb
(6).
◆
Extract the bulb from its seat.
For the reassembly:
NOTE
making the relevant positioning seats coin-
cide.
◆
Correctly install a new bulb of the same
type.
◆
Put back the clip (7).
◆
Connect the bulb electric connector (5).
use and maintenance Mojito 50/125/150 - Mojito Custom 50/125/150
!
CAUTION
Insert the bulb in the bulb socket,
73