Installing The Battery - APRILIA MOJITO 50 2004 Bedienungsanleitung

Mojito50_125_UK.book Page 70 Wednesday, June 9, 2004 9:23 AM
3

INSTALLING THE BATTERY

Read carefully indications given on
p. 66 (BATTERY).
◆
Remove the battery cover as specified
on p. 59 (REMOVING THE BATTERY
COVER ).
M50 MC50
◆
Seat the battery.
◆
Connect the battery breather tube.
!
CAUTION
Battery breather tube should always be
connected to avoid that sulphuric acid
vapours might corrode the electric sys-
tem, painted parts, rubber parts or seals
when coming off the breather.
◆
Reconnect the (red) positive cable (+)
first and then the negative cable (-).
◆
Coat terminals and clamps with special
grease or Vaseline.
◆
Fit the battery cover as specified on p. 59
(REMOVING THE BATTERY COVER
).
M50 MC50
70 use and maintenance Mojito 50/125/150 - Mojito Custom 50/125/150
All manuals and user guides at all-guides.com
M125 M150
3
MC125 MC150
INSTALLING THE BATTERY
M50 MC50
M125 MC125 M150
Read carefully indications given on
p. 66 (BATTERY).
◆
Reconnect the (red) positive cable (+)
first and then the negative cable (-).
◆
Coat terminals and clamps with special
grease or Vaseline.
While installing the battery, route elec-
tric cables to their correct position so
that they are not squashed.
◆
Seat the battery.
◆
Fit the battery cover (2).
M125 M150
MC125 MC150
MC150
!
CAUTION
1 2
!
CAUTION
Proceed with utmost care. Tongues
and/or seat grooves should not be dam-
aged.
NOTE
Ensure that both tongues are
properly seated.
◆
Tighten the retaining screws (1) on the
battery cover (2).
◆
Close the glove compartment as speci-
fied on p. 24 (GLOVE COMPART-
MENT).
M125 M150
MC125 MC150