Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Storage; Set-Up Location; Turning On - Parkside PKH 3000 B1 Bedienungs- Und Sicherheitshinweise

Keramik-heizgebläse
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 64
Make sure that the details on
 
the rating label are in conformity
with your mains voltage .
Only connect the product to
alternating current with an
earthing contact as otherwise a
protection against electric shock
is not provided .
In the event of malfunctions,
 
remove the mains plug from the
mains socket .

Cleaning and storage

Disconnect the product from the
 
wall outlet during periods of
disuse and before cleaning .
Instructions on cleaning the
 
product: see "Cleaning and
care" .
Store the product in a cool, dry
 
place protected from sunlight
and out of the reach of children .
˜ Before first use
Remove the packing materials .
 
Check the product for any damages .
 
NOTE: The product may give off some
vapours or odours during first use . These are
production or transport residue that will quickly
subside . There may also be quiet noises such
as clicking or crackling . These will also quickly
subside once the plastic parts have finally
adjusted to the operating conditions .
˜ Operation
˜ Set-up location
Place the product on an even, stable surface .
 
Maintain the following clearances around the
 
product:
30 cm to the left, right, top, and rear
100 cm to the front
˜ Turning on
Set the temperature control 
 
heating level switch 
Connect the power plug 
 
RCD-protected socket-outlet .
NOTES:
Make sure that the supply voltage of the
 
socket-outlet meets the requirements described
in the "Technical data" chapter .
Make sure that the power plug 
 
inserted into the socket-outlet .
to
and the
[
3 ]
to 0 .
4 ]
[
to an
7 ]
[
is fully
7 ]
[
GB
13

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis