Operation; Menu Structure - EuroLite LED PST-10 QCL Spot Bedienungsanleitung

OPERATION

Turn on the device. The display indicates the last operating mode. The operating modes can be selected by
means of the display and the control buttons. All settings remain stored even if the device is disconnected
from the mains. The device can be operated in stand-alone mode via the control board and the EUROLITE
IR-7 remote control or in DMX-controlled mode via any commercial DMX controller.

Menu structure

Press the MENU button so many times until the desired function is indicated on the display. Use the ENTER
button to select the function. With the buttons UP and DOWN you can select the mode or change values.
Confirm with ENTER.
Mode
DMX mode
Preset colors
Automatic mode
Sound control mode
Running speed in
automatic and sound
mode
Microphone sensitivity
for sound control
Color mix
Dimmer
Silent scene
Behavior in case of
missing DMX signal
Slave mode
IR remote control
Version
Display
9CH d001-d512
6CH
d001-d512
d001-d512
Addr 5CH
d001-d512
4CH
d001-d512
3CH
Stat 01-19
Auto Au 01 - 09
Soun So 01 - 09
SPEE SP01 - 09
SEnS SE01 - 09
r000-255
g000-255
Colo
b000-255
U000-255
dIMM dl01-dl09
on
SILE
oFF
bLac
Hold
FuLL
Lost
Stat
Auto
SLAV Slave
ON
InFr
OFF
V1.0 V1.0
23/32
Function
9-channel mode and start address
6-channel mode and start address
5-channel mode and start address
4-channel mode and start address
3-channel mode and start address
Constant lighting in one of 19 colors
Auto program
Sound program
Program running speed
slow > fast
Microphone sensitivity
low > high
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
Total brightness
dark > bright
LEDs off if there is no music signal
LEDs remain on if there is no music
signal
LEDs switched off
Most recent DMX value is held
All LEDs 100% on
Pre-selected static color 01-19
Pre-selected auto program 01-02
Slave mode
IR remote control on
IR remote control off
Current software version V1.0
00132514, Version 1.0