Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. Switch on the device with the power switch to start operation. After a few seconds, the fan starts
and the display indicates that a reset of the motors is in progress. The device is then ready for use. Now
activate the menu with MENU and ENTER and make the necessary settings for the respective operating
mode with the operating buttons.
Operating buttons
MENU
ENTER
UP
DOWN
Menu settings
Fixture
001-512
Address
Power on time
Information
Lamp
Temperature
Version: 1.0
Display Adjust
Personality
Iris Reverse
Color Preseting
Strobe
Preseting
Test
Off
Program
On
Slave
Master/
Slave
Master
Dimmer
Strobe
Iris
Manual
Color
Mode
CCT
Focus
Zoom
Selects the operating mode or returns to the initial screen.
Activates a value to be modified or saves a value when modifying.
Selects the next menu item or increases values when modifying.
Selects the previous menu item or decreases values when modifying.
Display
Hour: 0000h
Restarted hour: 0000h
000 C°
Display turned: OFF
Display turned: ON
Select Logo
Select Language EN/中文
OFF
ON
OFF
ON
OFF
ON
0-255
0-255
0-255
0-255
0-255
0-255
0-255
Start address setup
View fixture running time
Reset running time
View inside temperature
View software version
Display inversion on/off
Not available
Select menu language
Iris inversion on/off
Color selection on/off
Strobe effect on/off
Test program on/off
Slave setting
Master setting
Brightness
Speed
From open to closed
Color presets
Color temperature
Focus
Zoom
20/24
Function
DMX channel 1
DMX channel 2
DMX channel 3
DMX channel 4
DMX channel 5
DMX channel 6
DMX channel 7
00124839, Version 1.0
Werbung
Inhaltsverzeichnis
