Accessories - LIVSANE FDIR-V22 Gebrauchsanweisung

12. Accessories

12. Accessories
Only use original accessories. Check that the contents of the delivery are complete: Only use original accessories. Check that the contents of the delivery are complete:
Quantity Quantity
1 pc 1 pc
2 pcs 2 pcs
1 pc 1 pc
13. Trouble-Shooting 13. Trouble-Shooting
Troubles or error Troubles or error
message message
No response / Auto- No response / Auto-
matical reset matical reset
The thermometer The thermometer
shows the symbol shows the symbol shows the symbol shows the symbol
"Hi" "Hi" "Hi"
The thermometer The thermometer
shows the symbol shows the symbol shows the symbol shows the symbol
"Lo" "Lo" "Lo"
V22 BOOK.indb 7 V22 BOOK.indb 7
Parts Parts
Non-Contact Infrared Thermometer Non-Contact Infrared Thermometer
AAA batteries AAA batteries
User Manual User Manual
Checklists or situation Checklists or situation
The batteries are used up? The batteries are used up?
Battery in wrong polarity or type? Battery in wrong polarity or type?
Poor battery contact Poor battery contact
Temperature hampered by an air flux. Temperature hampered by an air flux.
In the forehead measurement mode: In the forehead measurement mode:
• Temperature measurement is too close to forehead. • Temperature measurement is too close to forehead. • Temperature measurement is too close to forehead. • Temperature measurement is too close to forehead.
• Temperature of a different object was measured, such as the • Temperature of a different object was measured, such as the • Temperature of a different object was measured, such as the • Temperature of a different object was measured, such as the • Temperature of a different object was measured, such as the
sunlight, the air from a fireplace. etc. sunlight, the air from a fireplace. etc. sunlight, the air from a fireplace. etc. sunlight, the air from a fireplace. etc. sunlight, the air from a fireplace. etc.
Hi: Temperature is higher than 42,9 °C (109.2 °F) Hi: Temperature is higher than 42,9 °C (109.2 °F) Hi: Temperature is higher than 42,9 °C (109.2 °F)
In the object measurement mode: In the object measurement mode: In the object measurement mode: In the object measurement mode:
• Temperature measurement is too close to object. • Temperature measurement is too close to object. • Temperature measurement is too close to object. • Temperature measurement is too close to object. • Temperature measurement is too close to object.
• The object temperature is higher than 100,0 °C (212 °F). • The object temperature is higher than 100,0 °C (212 °F). • The object temperature is higher than 100,0 °C (212 °F). • The object temperature is higher than 100,0 °C (212 °F).
• The object temperature is higher than 100,0 °C (212 °F).
Hi: Temperature higher than 100,0 °C (212 °F) Hi: Temperature higher than 100,0 °C (212 °F) Hi: Temperature higher than 100,0 °C (212 °F)
The hair or sweat may prevent the thermometer from taking The hair or sweat may prevent the thermometer from taking
an accurate temperature measurement. an accurate temperature measurement.
In the forehead measurement mode: In the forehead measurement mode:
• The measuring distance is too far. • The measuring distance is too far. • The measuring distance is too far. • The measuring distance is too far.
• Temperature of a different object was measured, such as the air • Temperature of a different object was measured, such as the air • Temperature of a different object was measured, such as the air • Temperature of a different object was measured, such as the air • Temperature of a different object was measured, such as the air
from the air conditioner. from the air conditioner. from the air conditioner.
Lo: Temperature less than 32,0 °C (89.6 °F) Lo: Temperature less than 32,0 °C (89.6 °F)
In the object measurement mode: In the object measurement mode: In the object measurement mode: In the object measurement mode:
• The measuring distance is too far. • The measuring distance is too far. • The measuring distance is too far. • The measuring distance is too far. • The measuring distance is too far.
• Have water vapor condenses on the lens. • Have water vapor condenses on the lens. • Have water vapor condenses on the lens. • Have water vapor condenses on the lens. • Have water vapor condenses on the lens.
Lo: Temperature less than 0 °C (32 °F) Lo: Temperature less than 0 °C (32 °F) Lo: Temperature less than 0 °C (32 °F)
The ambient temperature is beyond the range of measurement The ambient temperature is beyond the range of measurement The ambient temperature is beyond the range of measurement The ambient temperature is beyond the range of measurement
(10 °C – 40 °C or 50 °F – 104 °F) (10 °C – 40 °C or 50 °F – 104 °F) (10 °C – 40 °C or 50 °F – 104 °F)
The sensor or hardware is damaged The sensor or hardware is damaged
Low battery, but you can still use it Low battery, but you can still use it
Countermeasures or solutions Countermeasures or solutions
Replace with new batteries. Replace with new batteries.
Take out the batteries and replace Take out the batteries and replace
with new ones. with new ones.
Take out batteries and reinsert Take out batteries and reinsert
them in the correct orientation. them in the correct orientation.
Please leave the area and wait for Please leave the area and wait for
30 minutes to measure again. 30 minutes to measure again.
According to the instruction leaflet. According to the instruction leaflet.
Keep the thermometer in a room Keep the thermometer in a room Keep the thermometer in a room Keep the thermometer in a room
whose temperature is 10 °C – whose temperature is 10 °C – whose temperature is 10 °C – whose temperature is 10 °C – whose temperature is 10 °C –
40 °C or 50 °F – 104 °F for at least 40 °C or 50 °F – 104 °F for at least 40 °C or 50 °F – 104 °F for at least
30 minutes before trying agian. 30 minutes before trying agian.
Check for possibility of tem- Check for possibility of tem- Check for possibility of tem- Check for possibility of tem-
perature allowance first, then, perature allowance first, then, perature allowance first, then, perature allowance first, then, perature allowance first, then,
if necessary, send the device if necessary, send the device if necessary, send the device if necessary, send the device if necessary, send the device
to your distributor for repair. to your distributor for repair. to your distributor for repair.
Keep an eye on power and Keep an eye on power and Keep an eye on power and Keep an eye on power and
continue to use. continue to use. continue to use.
7 7
18/10/2020 22:32 18/10/2020 22:32