Automatic Shutdown; Battery Replacement - LIVSANE FDIR-V22 Gebrauchsanweisung

(3) Measurement mode selection (3) Measurement mode selection
Press „Environment / Body temperature switch button" to select either the object or human body Press „Environment / Body temperature switch button" to select either the object or human body
temperature measurement mode as below: temperature measurement mode as below:
(4) Sound selection (4) Sound selection
In the power-on state, press the „Tone selection button" to turn off or on the tone as below: In the power-on state, press the „Tone selection button" to turn off or on the tone as below:

(5) Automatic shutdown

(5) Automatic shutdown
If there is no action for more than 30 seconds after the temperature measurement, the thermometer will If there is no action for more than 30 seconds after the temperature measurement, the thermometer will
automatically come into the standby mode with no display on the screen. automatically come into the standby mode with no display on the screen.
(6) Memory function (6) Memory function
The function of data storage: The function of data storage:
This device can save up to 32 measurements (including serial number, mode and measurement This device can save up to 32 measurements (including serial number, mode and measurement
temperature). If there are more than 32 measurements in the memory, the oldest measurement will temperature). If there are more than 32 measurements in the memory, the oldest measurement will
automatically be overwritten by the system for the next measurement. automatically be overwritten by the system for the next measurement.
How the memory function works: How the memory function works:
1) By pressing the „M" button in the power-on status you will come to memory query mode, in which the 1) By pressing the „M" button in the power-on status you will come to memory query mode, in which the
device will display the latest memory value (M1 as Default). device will display the latest memory value (M1 as Default).
2) By pressing the „Power / scan" button the display will show all measurement values saved in the 2) By pressing the „Power / scan" button the display will show all measurement values saved in the
memory (from 1 to 32): memory (from 1 to 32):
(7) Battery instalment and replacement (7) Battery instalment and replacement
When turning on the thermometer, the device will automatically check the batteries' power status. If the When turning on the thermometer, the device will automatically check the batteries' power status. If the
battery power is too low, the display will show a low symbol „ battery power is too low, the display will show a low symbol „
to be not able to be used normally, the screen will flash the low symbol and then automatically switch off to be not able to be used normally, the screen will flash the low symbol and then automatically switch off
after 3 flashes prompting the user to replace the batteries with new ones. after 3 flashes prompting the user to replace the batteries with new ones.

Battery replacement:

Battery replacement:
1) Open the battery case and take out the old batteries. 1) Open the battery case and take out the old batteries.
2) Place the new batteries in the compartment and make sure they are inserted correctly. Then cover the 2) Place the new batteries in the compartment and make sure they are inserted correctly. Then cover the
case to complete the battery replacement. case to complete the battery replacement.
V22 BOOK.indb 5 V22 BOOK.indb 5
turn on the key tone | turn off the key tone turn on the key tone | turn off the key tone
5 5
". If the battery has been detected ". If the battery has been detected ". If the battery has been detected
18/10/2020 22:32 18/10/2020 22:32