Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Notice for disposal of batteries:
Notice for disposal of batteries:
Please pay attention to the related national laws of disposing used batteries and do not throw them
Please pay attention to the related national laws of disposing used batteries and do not throw them
directly into the trash.
directly into the trash.
Please take out the batteries, if the device is not used for long periods of time.
Please take out the batteries, if the device is not used for long periods of time.
Please do not put the batteries into fire.
Please do not put the batteries into fire.
We recommend to choose batteries from well-known brands in order to obtain the basic performance
We recommend to choose batteries from well-known brands in order to obtain the basic performance
and safety guarantees.
and safety guarantees.
8. Cleaning and Care Instructions
8. Cleaning and Care Instructions
The probe tip (lens) is the most fragile and sensitive part of the thermometer. Please keep its entirety
The probe tip (lens) is the most fragile and sensitive part of the thermometer. Please keep its entirety
clean in order to ensure the accuracy of measurements.
clean in order to ensure the accuracy of measurements.
It is recommended to clean the thermometer before and after each use. Please use the following steps
It is recommended to clean the thermometer before and after each use. Please use the following steps
and materials to clean the probe and lens:
and materials to clean the probe and lens:
•
•
Very gently wipe the surface with a cotton swab or soft cloth moistened with alcohol (e.g. 75 %
Very gently wipe the surface with a cotton swab or soft cloth moistened with alcohol (e.g. 75 %
Isopropyl). Wait for the alcohol to dry completely before using the thermometer again.
Isopropyl). Wait for the alcohol to dry completely before using the thermometer again.
•
•
If the lens is damaged, contact the distributor.
If the lens is damaged, contact the distributor.
Clean the unit body:
Clean the unit body:
•
•
Use a soft, dry cloth to clean the thermometer display and unit body.
Use a soft, dry cloth to clean the thermometer display and unit body.
•
•
If very dirty, use a soft cloth moistened with alcohol (e.g. 75 % Isopropyl) for cleaning.
If very dirty, use a soft cloth moistened with alcohol (e.g. 75 % Isopropyl) for cleaning.
Solution
Solution
Ethanol
Ethanol
Isopropyl Alcohol
Isopropyl Alcohol
Glutaraldehyde
Glutaraldehyde
NOTES:
NOTES:
•
•
Do not use abrasive cleaners.
Do not use abrasive cleaners.
•
•
Do not use other non-recommended methods to perform disinfection or cleaning.
Do not use other non-recommended methods to perform disinfection or cleaning.
•
•
This device is not waterproof, do not drop or submerge the device in water or any liquid. Do not
This device is not waterproof, do not drop or submerge the device in water or any liquid. Do not
sterilize by boiling method, gas or steam autoclave.
sterilize by boiling method, gas or steam autoclave.
9. Maintenance
9. Maintenance
1) We do not authorize any institution or individual to maintain and repair the product. If you suspect that
1) We do not authorize any institution or individual to maintain and repair the product. If you suspect that
your product has any issue, please contact the manufacturer or distributor to handle the case.
your product has any issue, please contact the manufacturer or distributor to handle the case.
2) The user must not attempt any repairs to the device or any of its accessories. Please contact the
2) The user must not attempt any repairs to the device or any of its accessories. Please contact the
retailer for repair and assistance.
retailer for repair and assistance.
3) Opening of the equipment by unauthorized agencies is not allowed and will terminate any claim
3) Opening of the equipment by unauthorized agencies is not allowed and will terminate any claim
of warranty.
of warranty.
WARNING: No modification of this equipment is allowed!
WARNING: No modification of this equipment is allowed!
10. Calibration
10. Calibration
The thermometer is initially calibrated at the time of manufacture. If this thermometer is used according
The thermometer is initially calibrated at the time of manufacture. If this thermometer is used according
to the use instruction, periodic re-adjustment is not required. If at any time you should question the
to the use instruction, periodic re-adjustment is not required. If at any time you should question the
accuracy of measurement, please contact your distributor or the manufacturer.
accuracy of measurement, please contact your distributor or the manufacturer.
11. Storage
11. Storage
1) Don't put the thermometer under direct sunlight, high temperature, moist environments,
1) Don't put the thermometer under direct sunlight, high temperature, moist environments,
flammable areas, or areas susceptible to vibration.
flammable areas, or areas susceptible to vibration.
2) Remove the batteries, if the device is not to be used for long durations.
2) Remove the batteries, if the device is not to be used for long durations.
V22 BOOK.indb 6
V22 BOOK.indb 6
Step 1
Step 1
Dilution with water
Dilution with water
Method
Method
70 – 80 %
70 – 80 %
Wipe the probe enclosure and button with the soaked cloth for 30 s.
Wipe the probe enclosure and button with the soaked cloth for 30 s.
70 – 90 %
70 – 90 %
As above.
As above.
0.5 – 2 %
0.5 – 2 %
As above.
As above.
Step 2
Step 2
6
6
18/10/2020 22:32
18/10/2020 22:32
Werbung
Inhaltsverzeichnis
