Duration Time - schwa-medico MODULAS TOUCH Gebrauchsanweisung

All manuals and user guides at all-guides.com
English
Selecting The Frequency From The Frequency Range*
The selection of the frequency range
is opened by touching the field
"frequency range".
As with the selection of the therapy
programs, the frequency group is
selected from the left hand side
menu, for example according to
Nogier or Reininger I. After touching
the frequency group field, select the
required frequency from this group in
the right hand side menu.
Other than with the therapy program selection, you should, after having selected a
frequency from the frequency range menu, set the energy and intensity separately
and dependent on the specific therapy requirements of the patient. If you do
not carry out any new settings, the parameters in respect of the last set therapy
program (or the last selected settings) will be preserved.
If you operate the point laser in
diagnosis mode, you can, during
treatment, change the frequency
by touching the fields "previous
frequency" and "next frequency".
* These selection options are only available with
the „Aurikulo DT & Schmerz" (Art.-Nr. 205373)
version.
Selecting The Therapy Duration Time
The therapy duration time setting
window is opened by touching the
field "therapy duration" .
By touching the arrow icons above and
below the time display you can change
the minutes and seconds. Confirm your
selection by touching "OK" or touch
"cancel" to leave the menu without
having carried out any changes.
37