Description Of The Surface Laser; Warning Plates; Operations; First Time Start-Up - schwa-medico MODULAS TOUCH Gebrauchsanweisung

schwa-medico

Description Of The Surface Laser

Technical Data:
Laser type
Wavelength
Beam divergence
vertical/horizontal
CW output power
Irradiation area
Laser class
NOHD value
Pilotlight
15. Laser start/stop button.
16. Laser ready display.
17. Laser in operation display.
18. Connecting cable.
19. Laser emission aperture

Warning Plates

The following warning plates are
attached to the laser:
Invisible laser radiation
Do not expose yourself to the beam
Laser Class 3B
according to EN 60825-1:2007

Operations

First Time Start-Up

The MODULAS TOUCH should be placed on a smooth, level surface.
The connection for the mains cable is located on the rear side of the device. It
should be checked that the mains power voltage and frequency values comply
with the values stated on the device's rating plate.The MODULAS TOUCH is then to
32
All manuals and user guides at all-guides.com
Operating Manual - MODULAS TOUCH
CW laser diodes
808 nm
8°/39°
16 x 60 mW (960 mW) ±20%
50 cm²
3B (according to EU Industrial Standard 60825-1:2007)
4 m
LED (blue,470nm)
16 15 17
18
19