Connecting The Laser; Notes On Operation; Code Input - schwa-medico MODULAS TOUCH Gebrauchsanweisung

All manuals and user guides at all-guides.com
English
be connected using the mains power cable with the plug inserted into the socket
provided.
The device is switched ON via the button on the rear side of the device (the ON/
OFF button with the illuminating blue circle).
Touch the ON/OFF button.
Once the basic device has started and the code input has been confirmed, the
MODULAS TOUCH is ready for operations.

Connecting The Laser

Connect the required laser(s) to an optional connection on the rear side of the
basic device. When disconnecting the laser from the socket always be sure to grip
the plug. Never pull on the cable because this could damage the laser.

Notes On Operation

The MODULAS TOUCH is operated via a colour display with touch function. When
you select a menu point or want to input something into the numeric pad, simply
touch briefly the desired numeral with your finger.
If you wish to re-position a listing, touch this menu and move the list upwards or
downwards. Alternatively, in this way you can shift the position bar to the right of
the menu. This appears automatically if the menu is longer than the list which is
displayed on the screen.

Code Input

Please enter the five digit safety code to
enable activation of the laser.
After confirmation with OK that the
code is correct the treatment menu will
be displayed.
If, after a period of ten minutes, no
operations are carried out on the
device, in the interest of security the
code must be re-entered.
33