Risk Of Electrical Shock; Replacing Of The Illurninant - Pkm KS82.3A+UB Bedienungsanleitung

WARNING!
edged objects to remove the encrusted ice. Never use a steam cleaner.

RISK OF ELECTRICAL SHOCK!

WARNING!
technical devices to accelerate the defrosting-progress. RISK OF
ELECTRICAL SHOCK!
Remove the contents from the fridge and put them into a cooling box.
1.
Switch off the appliance by turning the thermostat to position 0 /
2.
OFF and disconnect it from the mains or use a cut-off device.
Place a container in front of the appliance to catch the water.
3.
When the encrusted ice melts put some dry cloths into the freezer-
4.
compartment to hold the water back.
Do not use hot water to accelerate the defrosting operation.
5.
Remove the big pieces of ice first.
6.
Afterwards remove the small pieces of ice.
7.
Wipe and dry the appliance and door seals with dry and soft cloths.
8.
After cleaning leave the door open for some time to ventilate the appliance.
9.
6.2 Replacing of the illuminant
WARNING! The LED-illuminant must be replaced by a competent person only. If
the LED-illuminant is damaged, please contact a qualified professional (not covered
by the guarantee).
NOTICE! This product contains a LED light source of energy efficiency class G
according to EU-Regulation 2019/2015.
Never use any mechanical items, knives or other sharp-
Do not use hairdryers, electrical heaters or other
73
AUS /