Before Use; Unpacking; Before Starting Vacuum-Cleaning - Royal UP1Light Bedienungsanleitung

2 Before use

2.1 Unpacking

2 Before use
2.2 Before starting vac-
uum-cleaning
1. Unpack the appliance and all its accessories.
2. Check the contents for completeness and possible
damage. Information regarding scope of delivery
Page 24, "Overview of your UP1LIGHT".
ATTENTION:
Always transport or ship the appliance in its original
packaging to avoid damage. Keep the packaging for
such an event. Dispose of no longer needed packaging
material according to the applicable regulations of your
country.
NOTE:
Immediately contact your dealer if you have found dam-
age resulting from transport.
WARNING:
Danger of injury! A damaged appliance must never be
used. Check the vacuum cleaner and the power cable
before each use.
ATTENTION:
Only use the vacuum cleaner when all filters are intact,
dry and correctly fitted. Make sure that no openings are
clogged. Otherwise the vacuum cleaner might be dam-
aged.
ATTENTION:
Check the requirements of your floorings before using
the vacuum cleaner. Follow the recommendations of the
flooring manufacturers.
NOTE:
Your vacuum cleaner is equipped with a safety switch to
prevent overheating. It automatically cuts off the power
supply if the motor is overheated. In this case switch off
the vacuum cleaner with the on/off switch and pull the
plug from the mains socket. Eliminate the cause of over-
heating (e.g. clogged suction paths or dirty filters). Wait
for about 45 minutes. After the appliance has cooled off,
you may switch it on again.
29