Isomac GIADA Bedienungsanleitung Und Wartungsanleitung Seite 34

English
Coffee is pro- 1. Coffee not suitable for machine.
duced without 2. Improper grind.
froth. 3. Too little coffee in filter.
Coffee too cold. 1. The machine had not reached the
proper temperature.
2. Filter-holder not preheated.
3. Cups not preheated.
4. Pressure switch malfunction.
Coffee is too hot. 1. Pressure switch malfunction.
The machine 1. The lines are not primed.
does not produce 2. Obstructed outlet hole at end of steam
steam. pipe.
3. Too little water in tank.
4. Turbo steam nozzle improperly positioned.
1. Use different coffee.
2. Adjust coffee grind.
3. Put more coffee in the filter.
1. See section 11.1 – 11.2.
2. Filter-holder must be heated together with
the water – see section 11.1.
3. Properly heat the cups.
4. Contact the nearest SERVICE CENTER.
1. Contact the nearest SERVICE CENTER.
1. See section 11.4 – steam production.
2. Clean the outlet hole with a needle.
3. See section 11.1.
4. Reposition turbo steam nozzle.
34