Setup Menu - SHERCO 250 SE RACING Bedienungsanleitung

CONTROL DEVICES AND CONTROLS
Set up menu
Left and right buttons pressed simultaneously for 3s activates the Set up mode
Left button
Decrement time of day value
Decrement maintenance reminder value
The meter will automatically advance from one setting option
UNIT LIFE
(Unit type) (Wheel circumference)
Miles or km
Default: km
Do not modify these settings
Maintenance reminder:
maintenance reminder function is a countdown from a user defined number.
When the maintenance countdown gets to zero, the maintenance icon will appear on the LCD.
Follow these steps to reset or display the remaining accumulated ride time until next service reminder:
Displaying the remaining accumulated ride time (screen 3):
Hold the left Button down for 3seconds
to screen 3.
Resetting the remaining accumulated ride time (screen 3):
Hold the left Button down for 3seconds
for 3seconds The maintenance reminder is reset to zero (will begin the countdown again according to the
maintenance interval already chosen in the set up menu).
Note:
If the maintenance icon is already on, the distance displayed will be zero.
If the maintenance reminder is turned off , the information displayed on the screen will be OFF.
Toggle between M/H and KM/H settings
Toggle between 24 Hour et 12 Hour
to the next, after 5s of no button activation
PPr
(Pulse per revolution)
(Clock format)
12 or 24h
Default: 24h
the remaining value is displayed
the remaining value is displayed
Right button
Increment time of day value
Increment maintenance reminder value
(Clock setup) (Maintenance reminder)
Clock setup Maintenance reminder
5h (first oil change)
OFF :
disabled
no button activation
Hold the right Button down
setting ( in hours)
Default setting:
Set the
value
back
99