Setup Menu - SHERCO 250 SE/R Handbuch

n Set up menu
Left and right buttons pressed simultaneously for 3s activates the Set up mode
Left button
Decrement time of day value
Decrement maintenance reminder value
The meter will automatically advance from one setting option
UNIT LIFE
(Unit type) (Wheel circumference)
Miles or Km
Default: km
Do not modify these settings
Maintenance reminder: maintenance reminder function is a countdown from a user defined number.
When the maintenance countdown gets to zero, the maintenance icon will appear on the LCD.
Follow these steps to reset or display the remaining accumulated ride time until next service
reminder:
Displaying the remaining accumulated ride time (screen 3) → Hold the left Button down for 3seconds
→ the remaining value is displayed → no button activation → back to screen 3
Resetting the remaining accumulated ride time (screen 3) → Hold the left Button down for 3seconds →
the remaining value is displayed → Hold the right Button down for 3seconds → The maintenance
reminder is reset to zero (will begin the countdown again according to the maintenance interval
already chosen in the set up menu)
Note:
If the maintenance icon is already on, the distance displayed will be zero
If the maintenance reminder is turned off , the information displayed on the screen will be OFF
Toggle between M/H and KM/H settings
Toggle between 24 Hour et 12 Hour
to the next, after 5s of no button activation
PPr
(Pulse per revolution)
Right button
Increment time of day value
Increment maintenance reminder value
(Clock format) (Clock setup)
12 or 24h Clock setup
Default: 24h
(Maintenance reminder)
Maintenance reminder
setting ( in hours)
Default setting:
5h (first oil change)
OFF: Set the
disabled value
85