Cooling System; Servicing The Cooling System - SHERCO 250 SE RACING Bedienungsanleitung

COOLING SYSTEM

SERVICING THE COOLING SYSTEM

1
2
Motorcycle horizontal
104
WARNING
- The hot liquid can cause severe injuries.
- The coolant is harmful.
- After contact with skin or eyes, or ingestion, or injuries caused
by hot liquids: Consult a physician.
- Use protective gloves.
- Do not replace the coolant with water or other not approved
fluids: it could damage your engine.
- Follow these procedures carefully and always fill the engine with
coolant when the engine is cold.
- Place the bike upright on a horizontal surface.
- Remove the cap .
1
Approved Coolant
- Remove the bleed screw
- Fill the radiator full so that there is no air in the
system.
Radiator
Bleed screw
Fill the coolant to the top of the radiator.
Replace the cap and check to make sure it is tight.
1
ATTENTION
It is important to follow this procedure.
The lack of fluid, or the presence of a pocket of air left in the
radiator can cause serious damage to the engine.
Motul ® Motocool
Factory Line -35°C
.
2
M6X8 8Nm