Checking For Wear And Damage; Checking Spoke Tension - SHERCO 250 SE RACING Bedienungsanleitung

WHEELS, TIRES

CHECKING FOR WEAR AND DAMAGE

- Regularly check the depth of the tread.
Tread depth
If the depth is less than the value shown:
- Change the tire.
Check for cuts, cracks, nails, sharp objects and bulges on the tire.
If the tire is damaged:
- Change the tire.
- Changer le pneumatique.

CHECKING SPOKE TENSION

132
≥3mm
Do not neglect the tension of the spokes.
WARNING
Proper tension ensures stability and secure riding.
- Check the spoke tension before and after each use
of the bike, especially if the spokes are new or have
been recently adjusted.
- Use a screwdriver to tap on each spoke.
The sound must be sharp.
- If it is dull, take the bike to a Sherco dealer to get
the spokes properly adjusted.
Indicative tightening torque 5 - 6 Nm