Checking The Clutch Fluid Level; Removing The Engine Protector - SHERCO 250 SE RACING Bedienungsanleitung

CHASSIS MAINTENANCE

CHECKING THE CLUTCH FLUID LEVEL

1

REMOVING THE ENGINE PROTECTOR

1
- Turn the knob
the lever away from the handlebar.
Clutch lever free play A
2
- The hydraulic fluid is highly corrosive it can be dangerous to
3
the skin.
- Read the recommendations on the container.
Position the master cylinder horizontally.
- Remove the two screws
membrane
- Check the fluid level and fill if necessary.
Level of brake fluid below the top
of the reservoir.
Motul
- Reinstall the lid with the membrane and the screws.
Remove the screws
protector.
in the opposite direction to move
1
WARNING
, the cover
1
.
3
® RBF 700 brake fluid DOT 4
and remove the engine
1
≥3mm
and the
2
4mm
127