Engine Maintenance; Draining The Gear Box Oil; Refilling The Gear Box With Oil - SHERCO 250 SE RACING Bedienungsanleitung

ENGINE MAINTENANCE

DRAINING THE GEAR BOX OIL

2

REFILLING THE GEAR BOX WITH OIL

112
- Remove the engine guard ( p.127).
- When draining the oil the engine should be warm.
Use protective gloves.
1
- Position the motorcycle upright on a level surface.
- Place a container under the bike to catch the old oil.
- Remove the drain plug
- Remove the drain plug
- Allow the oil to drain.
- Clean the drain plugs
- Install the drain plug
Drain plug
3
Remove the engine oil filler cap
- Unscrew the oil level screw
- Fill with engine oil until the oil flows out of the
level screw.
Motor oil
- Once the level is done, replace the copper seal and
tighten the screw
WARNING
2
To protect the environment, oil, oil filters and used material must be
deposited in a collection center and not down drain or in the wild.
WARNING
.
1
.
2
and
1 2
and
1 2
& M16
1 2
.
4
0,75 L
to 7Nm.
4
with a degreaser.
with a new gasket.
15Nm
.
3
SAE 5W40