Wheels, Tires; Removing The Front Wheel; Reinstalling The Front Wheel - SHERCO 250 SE RACING Bedienungsanleitung

WHEELS, TIRES

REMOVING THE FRONT WHEEL

REINSTALLING THE FRONT WHEEL

1
1 2
3
2 3
Place the motorcycle on a suitable stand.
Remove the two screws
1
Loosen the two screws
3
Pull the axle through the right side.
Remove the wheel from the fork.
WARNING
Do not operate the front brake lever when the front wheel is
removed.
Check if the brake disc is not dirty or contaminated with
oil or grease. If it is, clean the disc with brake cleaner.
Brake cleaner
Install the spacer on the left side of the wheel hub.
1
Install the front wheel in the fork and install the axle
(grease the axle prior to installation).
Tighten the screws .
2
Fork screws
Install and tighten the axle nut
Front wheel axle nut
Tighten the screws on the right side of the bike.
Fork leg screws
Operate the front brake lever several times until the
pads touch the disc. Remove the bike from the stand
and push down on the fork several times.
and the nut .
2
.
Motul ® P2 Brake Clean
M8 20Nm
.
3
M20 60Nm
M8 20Nm
129