Technical Data; Electrical Characteristics - Sika E2 Betriebsanleitung

Technical data

9 Technical data
The technical data of customised versions may differ from the data in these instructions.
Please observe the information specified on the type plate.
E2 / D2 / C2
Pressure ranges input
- Piezo resistive pressure cell
- Strain gauge pressure cell
Accuracy (25°C)
±(% of full scale pressure value)(FS)
- Type E2
- Type D2
- Type C2
Sampling rate
Internal resolution AD converter
Temperature influence
Display
- Actual value
- MIN/MAX or Full Scale(FS)
- Bar graph
• Sampling rate
- Backlight
Pressure units

Electrical characteristics

Supply voltage
Battery life
Degree of protection (EN 60529)
Data logger (optional)
Max. data sets per recording series
Recording series
Storage rate
Max. recording duration
Data set information
Interface
Software required
Data format
- 32 -
-1...3/5 bar (E2) and -1...3/5/10 bar (D2 / C2)
-1...10 (E2), -1...20/40/60 bar and
0...100/160/250/400/700/1000 bar
0.05 % (0.1 % in vacuum)
10 ms (100 measurements/s)
12 bit = 4,096 steps
0.05% FS / 10 K
4 ½ digits (15 mm)
4 ½ digits (8 mm)
33 segments (drag indicator function)
50 ms (20 measurements/s)
50 x 34 mm
bar, PSI, mbar, kPa, MPa, kg/cm
Battery 2 x1.5 VDC AA (LR6 –AA), Alkaline (Mignon)
1,500 h (without lighting)
0.1 s...6.4 s
automatically per recording duration
Date / time
Time / ACTUAL pressure / Min / Max
1x Mini USB port
No – detection as removable data carrier
© SIKA • Ba_Ref-E2D2C2 • 07/2021
E2 / D2 / C2
0.5 %
0.1 %
2
, mH2O, inchH2O
IP 67
27,000
1...10
48 h
CSV