Transfer And Delete Measured Data; Maintenance And Return Shipment - Sika E2 Betriebsanleitung

Maintenance and return shipment

6.2 Transfer and delete measured data

Transfer measured data
 Connect the digital pressure gauge to your computer with the USB cable supplied.
 Switch on the digital pressure gauge if necessary.
The display shows
carrier. You can access the measured data via your computer.
The measured data contains the time, MIN/MAX and ACTUAL values separated by a semi-
colon. If the measured data is displayed incorrectly, import the data as "text".
Delete measured data
You can either delete all measured data via the device settings (
ual measurement data via the file manager of your operating system.
7 Maintenance and return shipment
IMPORTANT
Important parts or components can be damaged if the customer modifies or inter-
feres with the device.
The interference voids any warranty and manufacturer's responsibility!
Maintenance
The device is maintenance-free and cannot be repaired by the user. In case of a defect, the
device must be replaced or returned to the manufacturer for repair.
Only the batteries need to be changed regularly. We recommend replacing them with new
ones after 1.5 years at the latest ( p. 26).
IMPORTANT
If the device is not used for a longer period, the batteries should be removed from
the device to prevent leakage damage.
Return shipment
Follow the instructions on the procedure for sending returns which are on our website
(www.sika.net/en/service/service/rma-return-of-products).
- 30 -
. The digital pressure gauge is integrated as a removable data
Pc u5B
) or delete individ-
dEL dAtA
© SIKA • Ba_Ref-E2D2C2 • 07/2021
E2 / D2 / C2