Disassembly And Disposal - Sika E2 Betriebsanleitung

E2 / D2 / C2
8

Disassembly and disposal

CAUTION
Never remove the device from a plant in operation.
 Make sure that the plant is shut down professionally.
Before disassembly
Prior to disassembly, ensure that the plant
 is switched off.
 is in a safe and de-energised state.
 is depressurised and has cooled down.
Disassembly
 Watch out for any leaking media. Take appropriate precautions to collect them
 Loosen the pressure connection with an open-end wrench (AF 27).
 Manually turn the digital pressure gauge out of the measurement setup.
Disposal
Compliant with the Directives 2011/65/EU (RoHS) and 2012/19/EU (WEEE)*, the device
must be disposed of separately as electrical and electronic waste.
NO HOUSEHOLD WASTE
The device consists of various different materials. It must not be disposed of with
household waste.
 Take the device to your local recycling plant
or
 send the device back to your supplier or to SIKA.
* WEEE reg. no.: DE 25976360
Technical changes reserved
Disassembly and disposal
- 31 -