Troubleshooting; Security; Error State Detection; First Measures To Eliminate Faults - Conel STREAM Bedienungsanleitung

72
11

TROUBLESHOOTING

11.1

SECURITY

• Improper performance of activities during troubleshooting can cause death,
• Have all the above-mentioned work carried out only by professional and knowled-
• This staff must have read and understood these operating instructions.
• Turn the pump off without voltage and secure it against unauthorized or uninten-
• Ensure that the Conel Stream cannot be used without authorization or uninten-
11.2

ERROR STATE DETECTION

If the Conel Stream is working incorrectly, this may be noticeable at the following points:
• The pump switching machine displays a fault according to the status display;
• Unusual noises can be heard on the Conel Stream;
• The electrical safety organs were triggered.
11.3

FIRST MEASURES TO ELIMINATE FAULTS

Check the following circumstances:
• Press the „ENTER button" and acknowledge the fault;
• Check the raw line system for leaks;
• Check the water level in the submitted container;
• If necessary, check fi lters in the drinking water supply and, if necessary, clean:
• Are all picking points closed?
• Check the electrical fault current circuit breaker and the associated circuit breaker in the control
cabinet - switch on again if necessary;
If you are not able to detect any disturbance, please refer to the following chapter".
11.4

FURTHER MEASURES TO ELIMINATE FAULTS

Note:
If you cannot locate or repair the fault yourself or if you are unable to fi x it, please
contact your electrical/sanitary department or directly to the manufacturer (contact
details see chapter 1.5)
grievous bodily harm and damage to the pump.
geable personnel.
tional switching on.
tionally during troubleshooting.