Residual Hazards And Protective Measures; Specifications Conel Stream; Hydraulic Data Conel Stream; Electrical Data Conel Stream - Conel STREAM Bedienungsanleitung

56
2.4

RESIDUAL HAZARDS AND PROTECTIVE MEASURES

Risks Cause
Deadly Voltage-
electric carrying
shock parts due
to fault
condition
Fire Cable fire
3

SPECIFICATIONS CONEL STREAM

3.1

HYDRAULIC DATA CONEL STREAM

Property
Max head (Hmax.)
Max. flow (Qmax.)
Max plant height
Switch-on pressure Pump switching machine
Min. flow rate
3.2

ELECTRICAL DATA CONEL STREAM

Property
Voltage
Rated current
Engine power P1
Engine power P2
Power cord
Length
Description of the hazard /
person at risk
Deadly electric shock,
voltage above 50 V AC is
attached to voltage-carrying
parts, e.g., in the event of an
internal insulation fault of a
component /
total staff
Due to improper sizing of
the electrical line
Protective measures/protection objec-
tive
Preventing touching voltage-carrying parts
No hazardous stresses on housings of
components, due to protective grounding
(potential compensation)
Grounding of the terminal box
Installation of a main switch (for terminal
boxes) with the possibility of securing by
padlock.
Covering voltage-carrying parts
Attaching a warning sign: Warning of
dangerous electrical voltage
Basically:
Comply with five safety rules (DIN VDE
0105-1 / DIN EN 50110-1) /
Avoidance of fatal electric shock
Electrical cables must be measured for ma-
ximum electrical power against the mains
voltage and their tolerances and must be
clearly identified by colored marking. ((EN
60204, Sections 6, 10, 12, and 18).
Conel Stream
42.5m
4.8m3/h
30m
1.5 - 3.5 bar adjustable
>2 liters / min.
Conel Stream
230V / 50Hz
3.9A
880W
550W
Protective contact plug
1.5 m