How To Use Advanced Functions - Kaisai KCD-24 Bedienungsanleitung

Setting the TIMER
TIMER ON/OFF - Set the amount of time after which the unit will automatically turn on/off.
TIMER ON setting
Press TIMER button to initiate
Press Temp. up or down button for
the ON time sequence.
for multiple times to set the desired
time to turn on the unit.
TIMER x5
TIMER OFF setting
Press TIMER button to initiate
Press Temp. up or down button for
the OFF time sequence.
for multiple times to set the desired
time to turn off the unit.
TIMER
x10
NOTE:
1. When setting the TIMER ON or TIMER OFF, the time will increase by 30 minutes increments with each
press, up to 10 hours. After 10 hours and up to 24, it will increase in 1 hour increments. (For example,
press 5 times to get 2.5h, and press 10 times to get 5h,) The timer will revert to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
TIMER ON & OFF setting(example)
Keep in mind that the time periods you set for both functions refer to hours after the current time.
xn
TIMER
Unit turns
Timer starts
ON
Current 3:30PM 4PM
2:00PM 3:00PM
time 1PM
2.5 hours later
5 hours later
Point remote to unit and wait 1sec,
the TIMER ON will be activated.
1
sec
Point remote to unit and wait 1sec,
the TIMER OFF will be activated.
1
sec
xn xn
TIMER
Unit turns
OFF
Example: If current timer is 1:00PM,
to set the timer as above steps, the
unit will turn on 2.5h later (3:30PM)
and turn off at 6:00PM.
5PM 6PM
60

How to Use Advanced Functions

Swing function
Press Swing button
Swing
The horizontal louver will swing up and down
automatically when pressing Swing button.
Press again to make it stop.
Airflow direction
Swing
NOTE: When the unit is off, press and hold MODE and SWING buttons together for one second,
the louver will open for a certain angle, which makes it very convenient for cleaning. Press and hold
MODE and SWING buttons together for one second to reset the
LED DISPLAY
Press LED button
LED
Press this button to turn on and turn off
the display on the indoor unit.
2s
Swing
Keep pressing this button more than 2 seconds,
the vertical louver swing function is activated.
(Model dependent)
If continue to press the SWING button, five
different airflow directions can be set. The
louver can be move at a certain range each
time you press the button. Press the button
until the direction you prefer is reached.
louver(Model dependent).
5s
Press this button more
LED
than 5 seconds(some units)
Keep pressing this button more than 5 seconds,
the indoor unit will display the actual room
temperature. Press more than 5 seconds again
will revert back to display the setting temperature.
61