How To Use The Advanced Functions - Kaisai RG57A3(B)BGEF Bedienungsanleitung

How To Use The Advanced Functions

TURBO function
The TURBO function makes the unit work
extra hard to reach your present temperature
in the shortest amount of time possible.
When you press the TURBO button in
COOL mode, the unit will blow cool air
with strongest wind setting to jump-start
the cooling process.
When you press the TURBO button in
HEAT mode, for units with Electric heat
elements, the Electric Heater will activate
and jump-start the heating process.
SELF CLEAN function
Airborne bacteria can grow in the
moisture that condenses around heat
exchangers in the unit. With regular use,
most of this moisture is evaporated from
the unit. By pressing the SELF CLEAN
button, your unit will clean itself automa-
tically. The cleaning cycle takes 30
minutes, after which the unit will turn off
automatically. Pressing the SELF CLEAN
button mid-cycle will cancel the operation
and turn off the unit.
You can use SELF CLEAN as often as
you like.
Note: You can only activate this function
in COOL or DRY mode.
FOLLOW ME function
The FOLLOW ME function enables the
remote control to measure the temper-
ature at its current location. When using
AUTO, COOL, or HEAT functions,
measuring ambient temperature from
the remote control (instead of from the
indoor unit itself) will enable the air
conditioner to optimize the temperature
around you and ensure maximum comfort.
1. Press FOLLOW ME button to activate
function. The remote control will send
temperature signal to the indoor unit
every three minutes.
2. Press FOLLOW ME button again to
turn off this function.
ECO function
RG57A8(B)BGEF model only:
Used to enter the energy efficient mode.
Under cooling mode, press this button,
the remote controller will adjust the
temperature automatically to 24ºC, fan
speed of Auto to save energy(but only
if the set temperature is less than 24ºC).
If the set temperature is above 24ºC ,
press the ECO button, the fan speed
will change to Auto, the set temperature
will remain unchanged.
NOTE:
Pressing the ECO button, or modifying
the mode or adjusting the set temperature
to less than 24OC will stop ECO operation.
Under ECO operation, the set temper-
ature should be 24OC or more. it may
result in insufficient cooling. If you feel
uncomfortable, just press the ECO
button again to stop it.
ON/OFF
MODE
FAN
SLEEP
TURBO
Model: RG57A8(B)BGEF
60
ECO
TIMER
ON
TEMP
TIMER
OFF
< >
FRESH
CLEAN LED
FOLLOW