How To Use The Advanced Functions - Kaisai One+ KRX-09PEGI Bedienungsanleitung

the mode or adjusting the set temperature
to less than 24 C will stop ECO operation.
Under ECO operation, the set temper-
ature should be 24 C or more. it may
result in insufficient cooling. If you feel
uncomfortable, just press the ECO

How To Use The Advanced Functions

How To Use The Advanced Functions How To Use The Advanced Functions
button again to stop it.
ECO function
ECO function ECO function
SLEEP Function
NOTE: This function is only available under
NOTE: This function is only available under NOTE: This function is only available under
The SLEEP function is used to decrease
COOL mode.
COOL mode. COOL mode.
energy use while you sleep (and don t
Used to enter the energy efficient mode.
Used to enter the energy efficient mode. Used to enter the energy efficient mode.
need the same temperature settings to
Under cooling mode, press this button,
Under cooling mode, press this button, Under cooling mode, press this button,
stay comfortable). This function can
the remote controller will adjust the
the remote controller will adjust the the remote controller will adjust the
only be activated via remote control.
tions
temperature automatically to 24 C, fan
temperature automatically to 24 C, fan temperature automatically to 24 C, fan
For the detail, see sleep operation in
, ,
speed of Auto to save energy(but only
speed of Auto to save energy(but only speed of Auto to save energy(but only
USER S MANUAL.
if the set temperature is less than 24 C).
if the set temperature is less than 24 C). if the set temperature is less than 24 C).
Note: The SLEEP function is not
If the set temperature is above 24 C ,
If the set temperature is above 24 C , If the set temperature is above 24 C ,
available in FAN or DRY mode.
press the ECO button, the fan speed
press the ECO button, the fan speed press the ECO button, the fan speed
will change to Auto, the set temperature
will change to Auto, the set temperature will change to Auto, the set temperature
will remain unchanged.
will remain unchanged. will remain unchanged.
NOTE:
Follow me function NOTE: NOTE:
Pressing the ECO button, or modifying
Pressing the ECO button, or modifying Pressing the ECO button, or modifying
The Follow me function enables the
the mode or adjusting the set temperature
the mode or adjusting the set temperature the mode or adjusting the set temperature
remote control to measure the temperature
to less than 24 C will stop ECO operation.
to less than 24 C will stop ECO operation. to less than 24 C will stop ECO operation.
at its current location and
Under ECO operation, the set temper-
Under ECO operation, the set temper- Under ECO operation, the set temper-
to the air conditioner every 3 minutes interval
ature should be 24 C or more. it may
ature should be 24 C or more. it may ature should be 24 C or more. it may
When using AUTO, COOL, or HEAT modes,
result in insufficient cooling. If you feel
result in insufficient cooling. If you feel result in insufficient cooling. If you feel
Mode measuring ambient temperature from the ON/OFF
uncomfortable, just press the ECO
uncomfortable, just press the ECO uncomfortable, just press the ECO
remote control (instead of from the indoor
button again to stop it.
button again to stop it. button again to stop it.
unit itself) will enable the air conditioner to
optimize the temperature around you and
ensure maximum comfort.
SLEEP Function Timer Timer
SLEEP Function SLEEP Function
The SLEEP function is used to decrease
The SLEEP function is used to decrease The SLEEP function is used to decrease Follow
LED
me
energy use while you sleep (and don t
energy use while you sleep (and don t energy use while you sleep (and don t
Short
need the same temperature settings to
need the same temperature settings to need the same temperature settings to
Turbo
cut
stay comfortable). This function can
stay comfortable). This function can stay comfortable). This function can
only be activated via remote control.
only be activated via remote control. only be activated via remote control.
For the detail, see sleep operation in
For the detail, see sleep operation in For the detail, see sleep operation in ,
, ,
, , , ,
USER S MANUAL.
USER S MANUAL. USER S MANUAL.
Note: The SLEEP function is not
Note: The SLEEP function is not Note: The SLEEP function is not
Hold together for one second available in FAN or DRY mode.
available in FAN or DRY mode. available in FAN or DRY mode.
to activate LOCK function
Follow me function
Follow me function Follow me function
LOCK function
The Follow me function enables the
The Follow me function enables the The Follow me function enables the
remote control to measure the temperature
remote control to measure the temperature remote control to measure the temperature
Press Turbo button and Self clean
at its current location and
at its current location and at its current location and
button simultaneously for one second
to the air conditioner every 3 minutes interval
to the air conditioner every 3 minutes interval to the air conditioner every 3 minutes interval
to lock or unlock the keyboard.
When using AUTO, COOL, or HEAT modes,
When using AUTO, COOL, or HEAT modes, When using AUTO, COOL, or HEAT modes,
measuring ambient temperature from the
measuring ambient temperature from the measuring ambient temperature from the
remote control (instead of from the indoor
remote control (instead of from the indoor remote control (instead of from the indoor
Self clean function
unit itself) will enable the air conditioner to
unit itself) will enable the air conditioner to unit itself) will enable the air conditioner to
Airborne bacteria can grow in the moisture
optimize the temperature around you and
optimize the temperature around you and optimize the temperature around you and
that condenses around heat exchanger in
ensure maximum comfort. ensure maximum comfort. ensure maximum comfort.
the unit. With regular use, most of this
moisture is evaporated from the unit.
When the self clean feature is activated,
your unit will clean itself automatically. After
cleaning, unit will turn off automatically.
You can use self clean feature as often as
you like.
Note: You can only activate this function
O
O
, ,
,
,,
O
O O
send this signal
O
O O
Fan
Hold down this
button for 2
seconds to
activate sleep
function
Self
clean
, ,
, , , ,
, ,
,,
,, ,,
send this signal
send this signal send this signal
,
LOCK function
,,
How To Use The Advanced Functions
O O O
Press Turbo button and Self clean
button simultaneously for one second
O
O O
to lock or unlock the keyboard.
O
O O
Self clean function
Airborne bacteria can grow in the moisture
that condenses around heat exchanger in
the unit. With regular use, most of this
moisture is evaporated from the unit.
When the self clean feature is activated,
.
your unit will clean itself automatically. After
cleaning, unit will turn off automatically.
Mode
You can use self clean feature as often as
you like.
Note: You can only activate this function
Timer Timer
LED
,
, ,
1 1 3 3
Turbo
LOCK function
LOCK function LOCK function
,,
,, ,,
Press Turbo button and Self clean
Press Turbo button and Self clean Press Turbo button and Self clean
button simultaneously for one second
button simultaneously for one second button simultaneously for one second
to lock or unlock the keyboard.
to lock or unlock the keyboard. to lock or unlock the keyboard.
Self clean function
Self clean function Self clean function
TURBO function
Airborne bacteria can grow in the moisture Airborne bacteria can grow in the moisture Airborne bacteria can grow in the moisture
that condenses around heat exchanger in
that condenses around heat exchanger in that condenses around heat exchanger in
The TURBO function makes the unit work
the unit. With regular use, most of this
the unit. With regular use, most of this the unit. With regular use, most of this
extra hard to reach your present temperature
moisture is evaporated from the unit.
moisture is evaporated from the unit. moisture is evaporated from the unit.
in the shortest amount of time possible.
When the self clean feature is activated,
When the self clean feature is activated, When the self clean feature is activated,
When you select TURBO feature in COOL
.
. .
your unit will clean itself automatically. After
your unit will clean itself automatically. After your unit will clean itself automatically. After
mode, the unit will blow cool air with
cleaning, unit will turn off automatically.
cleaning, unit will turn off automatically. cleaning, unit will turn off automatically.
strongest wind setting to jump-start the
You can use self clean feature as often as cooling process.
You can use self clean feature as often as You can use self clean feature as often as
you like. When you select TURBO feature in HEAT
you like. you like.
Note: You can only activate this function mode, for units with Electric heat elements,
Note: You can only activate this function Note: You can only activate this function
the Electric Heater will activate and
jump-start the heating process.
Hold down TURBO button for 2 seconds, the
Ionizer/Plasma Dust Collector(depending
1 1 3 3
1 1 3 3 1 1 3 3
on models) is energized and will help to remove
pollen and impurities from the air.
86
Follow
LED
me
Self
Short
Turbo
clean
cut
Hold together for one second
to activate LOCK function
Mode ON/OFF Fan
Mode Mode ON/OFF ON/OFF Fan Fan
Hold down this
button for 2
Timer Timer
Timer Timer Timer Timer
Sleep
seconds to
Hold down Fan
activate sleep
button for 2
Follow
LED Follow Follow
LED LED
me
me me
function
seconds to activate
Self
Short Self Self Silence function
Short Short
Turbo
Turbo Turbo
ION
clean
clean clean
cut
cut cut
ON/OFF Fan
in COOL or DRY mode.
Press this button
twice in one second
Hold together for one second
Hold together for one second Hold together for one second
to activate 8 C
to activate LOCK function Follow
to activate LOCK function to activate LOCK function
me
heating function
Short Self
cut clean
Hold down this button
for 2 seconds to
activate fresh function
in COOL or DRY mode.
in COOL or DRY mode. in COOL or DRY mode.
seconds to
activate sleep
function
S
Ho
to
Hold down this Hold down this
fre
button for 2 button for 2
res
seconds to seconds to
ca
activate sleep activate sleep
wi
function function
8
W
un
tem
bu
ac
O
Th
tem
un
U
re
P
is
ba
op
sp
If
sy
cu
op
fa
(if
S