Settings And Adjustments - Invacare Ultra-Light Neo Bedienungsanleitung

Settings and adjustments

We advise you to call upon your Küschall / Invacare dealer for any
change or adjustment made on your wheelchair.
Every Küschall wheelchair is made-to-measure, according to the detail
given on the prescription form. A comfortable and energy sparing drive
can however depend on small adjustments which can only be carried
out once the wheelchair user has tried out his wheelchair. In order to
conduct these adjustments, this chapter will go through the various
adjustement possibilities. If you don't feel confident about making the
adjustments yourself, we advise you to turn to your dealer for help.
Adjustment of the brakes
To adjust the brakes, loosen the Allen screw situated on the clamp
(Allen key 5mm) and move the brake to the desired position.
Whenever there is a change to the rear wheel
position the brakes must be reajusted. The
distance between the brake gripper and the tyre
should be 25 mm, when the brakes are loose.
In the case of the Performance brakes and the
Active brakes, the brake gripper should pene-
trate no more than 4mm into the tyre, in the
activated position.
CAUTION: Make sure that the air
pressure of your tyres is
convenient (see "Safety: Tyre
pressure").Tighten all screws
firmly!
Footrest height adjustment
To adjust the height of the footrest, slacken
the hexagon screws above the footrest using
the 8mm open-ended spanner whilst steadying
the 3mm hexagon head socket screw. Slide
the foot section telescope to the desired height
and insert the screws in the nearest holes.
CAUTION : Ensure that the screws are
securely tightened.
GB
25 mm
15 mm
Footsection
tube
telescope
telescopique
31